AIANO FLMINI – Floodlight guard

£170.70 (inc. VAT)

Wire mesh galvanised floodlight guard to suit medium floodlight – for outdoor use.

In stock

SKU: flmini Categories: ,


AIANO FLMINI floodlight guard designed to fit medium-sized floodlight fixtures for wall, ceiling or floor mounting. The FLMINI security lighting guard is hot-dip galvanised to provide maximum protection against corrosion, making it suitable for outdoor use. The FLMINI is a medium standard floodlight guard, which means that it will suit many popular medium sized floodlight models.

These sturdy five-sided floodlight guards are made from steel weld mesh on a strong round bar frame, and are hot-dip galvanised. It is suitable for all types of floodlight including LED floodlighting. The guards have welded lugs for fixing to the wall, ceiling or floor. The FLMINI floodlight cage will completely enclose your floodlight fixture and provide protection from damage in a wide variety of environments including housing association buildings, schools, sports facilities, stations and car parks.

Which guard size? Unlike radiator guards, for light guards there is no strict rule about the clearance required between the light fitting and the guard. For most standard types of light fitting it is recommended that there be clearance of about 30-50mm between the light fitting and the guard. Please see Additional Information for a partial list of compatible products.

Compatibility: AIANO FLMINI floodlight guard is designed to fit many popular makes of floodlight, however, it is important to check the floodlight dimensions and intended angle of installation before purchasing a floodlight cage.

Key features:

  • AIANO floodlight guards are made from 25mm x 25mm mild steel weld mesh on a steel frame with welded lugs.
  • Range: the guard is large enough to allow the floodlight to be adjusted to the desired angle.
  • Colour: hot dip galvanising provides the best possible protection from corrosion for mild steel. The galvanised finish starts as a bright ‘silver’ but dulls to a matt grey colour when exposed to rain and damp.
  • Clearance: there is a natural ‘give’ in the mesh which is perfectly normal. We therefore recommend a clearance of 50mm between the light fitting and the guard.
  • Finger-safe: If the guard must be finger-safe, i.e, an average adult finger cannot penetrate the mesh to touch the light fitting, the clearance should be extended to 75mm.
  • Origin: the floodlight cage is manufactured in the UK from British and EU-sourced steel.
  • Cage size: please check the dimensions of your floodlight and the intended angle of installation in order to be sure that the FLMINI is the correct cage.

Contact us for further advice or guidance on selecting the right guard for your light fixtures.

Additional information

Weight 38.27 kg
Dimensions 54.5 × 53 × 53 cm
Product Type

Floodlight Guard


Bright ‘silver’ dulling to matt grey

Guard Manufacturer

Manufactured in the UK by AIANO


Made from 1" x 1" x 12swg (25 x 25 x 2.64mm) steel weld mesh on a 5swg (5.38mm) frame, with 4 welded lugs and hot dip galvanised after manufacture.


Made from steel produced in the UK and EU.

Short Description

Wire mesh galvanised floodlight guard to suit medium floodlight – for outdoor use.

Suits Light Fitting

Medium sized floodlights

Guard Size

w457 x h508 x d508mm