PANEL & CONVECTOR HEATER GUARDS

Aiano’s has been designing and manufacturing wire mesh panel heater guards, electric heater guards, and convector heater guards for as long as there have been electric heaters on the market. We manufacture quality, distinctive wire mesh heater guards to provide health and safety in various industrial, public and domestic environments. Aiano’s keeps a wide range of heater guards in stock suitable for the most popular heater models of major suppliers like Dimplex and Creda, but if we do not have your guard in stock, we can make panel heater guards to order for any make or model of heater.

AIANO panel heater guard for DImplex QRAD200

QRAD200-AIA ST sloping top

AIANO convector heater guard

PH750 panel heater guard

Dimplex PLXE Heater Guards

Dimplex launched the PLXE range of panel heaters as the successor to the ever popular PLX series. The PLXE range is a Lot 20 compliant, modern and efficient electric panel heater. The heaters have programmable room temperatures and heating time periods, multiple seven-day timer profiles and electronic thermostat accurate to within 0.2°C.

AIANO has worked in cooperation with Dimplex to ensure that our ever popular existing PH range of panel heater guards are fully compliant with the new PLXE models. There is an AIANO guard for each of the four PLXE models.

For information about AIANO guards for Dimplex XLE storage heaters, and other panel and convector heaters please go to Storage Heater Guards.

Dimplex Q-Rad Heater Guards

The Q-Rad heater is a new generation of electric heater manufactured by Dimplex. According to Dimplex the Q-Rad monitors the effect of its actions on a room’s temperature. It knows precisely how long it takes to reach the desired temperature and when to turn off as it approaches that target. Q-Rad is a revolutionary system which allows the customer to benefit from a low cost, low carbon heater.

In cooperation with Dimplex, Aiano’s have developed a range of wire mesh heater guards for the new generation Q-Rad electric heaters. AIANO have also worked with Dimplex to develop and optimize heater guards for the Quantum heaters, as well as other products including quartz heater guards and ECOT thermostatic tubular heater guards.

For information about AIANO guards for Dimplex Quantum, and other panel and convector heaters please go to Storage Heater Guards.

Aiano Product Code	To Suit Dimplex Model	Guard Size (mm) WxHxD
QRAD075-AIA	QRAD050, QRAD075	660 x 686 x 178
QRAD100-AIA	QRAD100	838 x 686 x 178
QRAD150-AIA	QRAD150	914 x 686 x 178
QRAD200-AIA	QRAD200	1067 x 686 x 178

How to choose your panel heater guard or electric radiator guard

Aiano’s manufactures a wide selection of panel heater guards, convector heater guards, and electric radiator guards that fit many popular heaters on the market. However, before placing an order for our standard guards be sure to check that you have the correct guard size.

Panel heater-type guards are 5-sided guards that have a top, bottom,front and two sides. They completely enclose the heater and are fixed to the wall.

It is important to have some distance between the heater and the guard – we call this clearance. If the guard is too close to the heater, first, there is a risk of the guard itself becoming too hot and, second, vulnerable people can put their fingers through the mesh and touch the heater.

When we calculate guard size we will usually add the following clearance to the heater size to ensure that the guard is finger-safe:

width – 150mm
height – 150mm
depth from the wall – 75-100mm (75mm is the minimum clearance for a guard to be finger-safe).

If you are in any doubt about the correct size guard for your heater, please contact us for advice.

Panel Heater Guards

Aiano Product Code	To Suit Dimplex Model	To Suit Creda Model	Guard Size (mm) WxHxD
PH500	PLX050E, PLX500, EPX500	TPRIII500	610 x 584 x 178
PH750	PLX075E, PLX750, PLX1000, EPX750, EPX1000	TPRIII750, TPRIII1000	762 x 584 x 178
PH1000	PLX125E, PLX1250, PLX1500, EPX1250, EPX1500	TPRIII1250, TPRIII1500	838 x 584 x 178
PH2000	PLX200E, PLX2000, EPX2000	TPRIII2000	1016 x 584 x 178
PH3000	PLXC300E, PLX3000TX/TI		1016 x 584 x 229

Convector Heater Guards

Aiano Product Code	To Suit Dimplex Model	To Suit Heatstore Model	Guard Size (mm) WxHxD
CH200WM	DX200S/T, DXW200S/WM, DXC20 T/TI		737 x 508 x 178
CH300WM	DX300S/T/TF/WM, DXC30T/TI		868 x 508 x 178
DXC30FTI	DXC30FTI		868 x 508 x 203
HS2020WM		HS2020 WMX	762 x 508 x 279
HS3030WM		HS3030 X/TX	889 x 610 x 279

Creda Nobo Convector Heater Guards

Aiano Product Code	To Suit Creda Model	Guard Size (mm) WxHxD
NFC4N05-AIA	NFC4N05	686 x 559 x 203
N-4N07-AIA	NFC4N07, NTE4N07	787 x 559 x 203
N-4N10-AIA	NFC4N10, NTE4N10	889 x 559 x 203
N-4N12-AIA	NFC4N12, NTE4N12	1067 x 559 x 203
N-4N15-AIA	NFC4N15, NTE4N15	1168 x 559 x 203
NFC4N20-AIA	NFC4N20	1473 x 559 x 203
NTE4N20-AIA	NTE4N20	1270 x 559 x 203

Creda Nobo Panel Heater Guards

Aiano Product Code	To Suit Dimplex Model	To Suit Creda Model	Guard Size (mm) WxHxD
E4EU-0500-AIA			660 x 559 x 152
E4EU-0750-AIA			787 x 559 x 152
E4EU-1000-AIA			940 x 559 x 152
E4EU-1250-AIA			1118 x 559 x 152
E4EU-1500-AIA			1270 x 559 x 152
E4EU-2000-AIA			1676 x 559 x 152
C4N-0500-AIA			584 x 559 x 152
C4N-0750-AIA			660 x 559 x 152
C4N-1000-AIA			838 x 559 x 152
C4N-1250-AIA			991 x 559 x 152
C4N-1500-AIA			1118 x 559 x 152
C4N-2000-AIA			1473 x 559 x 152

Rointe Electric Radiator Guards

Aiano Product Code	To Suit Dimplex Model	To Suit Creda Model	Guard Size (mm) WxHxD
K10330-AIA			508 x 762 x 178
K10550-AIA			686 x 762 x 178
K10770-AIA			838 x 762 x 178
K10990-AIA			991 x 762 x 178
K11210-AIA			1143 x 762 x 178
K11430-AIA			1346 x 762 x 178
K11600-AIA			1473 x 762 x 178

Aiano’s heater guards are suitable for most makes of heaters, including Dimplex, Creda, Heatstore and Sunhouse. We also make guards for Consort Claudgen, DeLonghi and Stirflow products and other brands and models of heater.

Always check the size of your fitting carefully to ensure selection of the correct guard or call us today on 020 7987 1184 for a quote.